Nadcap ISO-13485 FAA Repair Station AS-9100 ISO-9001 Accredited & FDA, ITAR, FFL, ATF Registered & Programs: RoHs, ELV, NSF, DoD, DoE, & 10 CFR App B

New Coatings

New Coatings

Diamonize This coating solution is used in many applications to handle wear, abrasion, and corrosion. The coating is very uniform and can require no post machining. Process is not limited to line of site. Hard Chrome and Flame Spray Replacement Technology.
Diamonize-Plus This coating solution is used in many applications to handle wear, abrasion, and corrosion. The coating is very uniform and can require no post machining. Process is not limited to line os site. Hard Chrome and Flame Spray Replacement Technology.
X-Calibur Hard chrome replacement technology and coating process with up to three to ten times the corrosion resistance of chrome. In wear applications and testing can out perform standard chrome. Has a low coefficient of friction and anti-galling properties. This is a chrome free process and is more uniform than chrome as deposited.
X-Protect Nano-Technology hard type coating with a low coefficient of friction needed in applications that have high wear. XPROTECT can be applied to all ferrous metal & most non-ferrous metals. The coating is also anti-galling and corrosion resistant. As coated the hardness is 500 to 750 Vickers and after heat-treatment hardness up to 1100 Vickers. Hard chrome replacement technology.
Techniloy A hybrid EN deposit coating developed to compete with electroless nickel and other alloys. This deposit has superior corrosion resistance and can usually offer a cost savings.
UltraKoat An electroless nickel co-deposit with sub-micron particles of a diamond-like material. This deposit has a very low coefficient of friction and can be used in applications over 500 degrees F, where PTFE starts to decompose. The diamond-like particles and low coefficient of friction give this coating the ability to perform well in sliding, wear, and abrasive applications. Not recommended for fluid wear.
Optical Grade Electroless Nickel “Optical Grade Electroless Nickel” is a high phosphorous, high build deposit, which is formulated specifically for the optics industry. This coating is perfectly uniform and can be plated to thickness exceeding 0.015?pit free. This optic grade EN uses the best chemistries in a controlled atmosphere. It is highly suitable for single point diamond turning.
BioBlack-Ti

This process does not alter the chemical composition of the surface where multiple intersecting pores of oxide layers absorb light and create a perfect black color.

Features:

  • Oxide layered chemical composition is close to the base titanium alloy
  • Chemically stable
  • Durable
  • Surface quality can be bright or matte, depending on base material
MedicalCoatings10
TM-Rx

This process is precisely controlled by our lab staff and engineering. It is a medical grade chromium coating designed to prevent wear, galling, and corrosion. Other properties of this coating are lubricity, durability, extreme hardness, and low coefficient of friction. Parts and instruments coated with TM-Rx are designed to work and look like new after 1,000 cycles in an autoclave.

USD Class VI / ISO 10993-1 Certification, as well as the principles governing the biological evaluation of medical devices. Certified report number: 331553, 33167, 331621, & 331555.

TM?Rx is usually applied to Stainless Steel. This coating can be applied to most ferrous and non-ferrous metals, such as copper and aluminum.